How Deep Should A Shelf Be?

How thick should Plywood be for garage shelves?

TIP: To optimize plywood use, plan your shelving to be 12″, 16″ or 24″ in width.

Then you can rip your plywood into either four 12″ wide strips, three 16″ wide strips or two 24″ wide strips with no waste..

Should you hang towels over toilet?

Above Toilet Storage Alternatives So if you have the toilet straddle situation happening, then it’s likely you need a place to store toilet paper, towels, etc. I would suggest going with shelves, a cabinet, or a towel rack over the toilet instead.

How much space should be between open shelves?

Measure Height of Shelves Allow 10 to 12 inches in between the upper and lower shelving unit.

What type of plywood should I use for garage shelves?

How To Build Basic Garage Storage Shelving4 sheets 7/16” OSB (or 1/2”plywood)7- 2X4s by 8 feet long.6- 2X2s by 8 feet long.3 inch nails or screws.1-1/2 inch drywall screws.

What is stronger OSB or plywood?

Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists. However, nail-holding ability controls performance in shear wall applications.

Are built in bookshelves outdated?

The best and worst thing about a built-in bookcase is that it will be a major part of the room’s design forever. And if yours are outdated, they can make the entire space feel drab. To remedy this pain point, Handler recommends painting them to better reflect your home’s current style.

What is standard shelf depth?

16 to 20 inches deepThe standard depth of most shelves is 16 to 20 inches deep. The highest shelf should be shallower, like 12 inches deep, to make those items easier to access. If you find that stuff seems to get pushed to the back and forgotten about, you should consider even shallower shelves.

What is a good depth for a bookcase?

Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.

How do I organize my toilet shelf?

Over the toilet hanging baskets Yet another inexpensive way to add over the toilet storage space is to use fabric containers from discount stores. Just hang them or tie them to an existing towel bar and you have a quick and easy to access storage option ready.

How thick should Plywood be for a shelf?

Plywood is a popular choice for building entertainment units and shelving. However, while ¾” plywood may work fine for shelves less than 30” or so in length, the likelihood of mid-shelf sagging increases with shelf length.

Do Built in bookshelves increase home value?

A wall of bookshelves can be used to divide rooms. Done right, built in bookcases will increase the resale value of the home. Key features that add value include proper placement, high quality construction, and flexibility through adjustable shelving configurations.

How deep should bathroom shelves be?

14″Get shelving that’ll make your bathroom look neat and efficient. What we suggest are 14″ deep shelves. By getting deeper shelving, your things won’t look as if they’re hanging at the edge, which they will be if you choose 12-inchers. If you want more glamourous shelves, then choose 19- or 24-inchers.

How deep should bar shelves be?

18 inchesWhat is standard bar depth? It should be large enough to fit a sink and fixtures but not so deep you can’t reach to the back. Typically a bar top that is a minimum of 18 inches deep works well, but you can extend this to 20 to 24 inches to allow more space for larger sinks and fixtures.